浙江杭州冷干机冷凝器生产商厂家杭州宏力制冷配件厂主要提供蒸发冷凝器、空调冷凝器、翅片蒸发器、除湿机和冷干机等产品,提供冷凝器价格报价业务,若您有需要,请拨打:86-0571-82307693

阿里巴巴店铺

点击进入

新闻资讯

当前位置:网站首页 > 新闻资讯

  • 翅片式冷凝器温度过高的原因有哪些
  • 本站编辑:杭州宏力制冷配件厂发布日期:2018-07-13 10:35 浏览次数:

翅片式冷凝器温度过高的原因及排除方法

Cause and elimination method of high temperature of fin condenser

冷却水进水温度过高或冷却水流量不足,制冷剂蒸汽冷凝放出的热量不能及时排出系统,导致冷凝速度减慢,冷凝压力和冷凝温度随之升高。导致冷却水进水温度过高的可能原因及排除:

The temperature of the cooling water is too high or the cooling water flow is insufficient. The heat of condensate steam condensing can not discharge the system in time, which causes the condensation speed to slow down, and the condensation pressure and the condensing temperature increase. Possible reasons for the excessive temperature of the cooling water inlet and the elimination:

6-1P6211U353.png

1.冷却塔风机停转;排除方法:检查风机停转的原因,排除故障后启动风机。

1. cooling tower fan to stop; remove: check the cause of fan stop and start the blower after troubleshooting.

2.冷却塔布水系统喷嘴阻塞;排除方法:清洗冷却塔布水系统喷嘴,保证淋水足量、均匀。

2. cooling tower water system nozzle blocking; removal method: cleaning cooling tower water system nozzles, ensure adequate and uniform sprinkling.

3.冷凝器出水温度偏高;查明原因并排除。

3. the temperature of condenser outlet water is high.


联系方式

  • 电话:86-0571-82307693
  • 移动电话:15068701079
  • qq : 754848622
  • qq邮箱:754848622@qq.com
  • 传真:86-0571-82300536
  • 地址:杭州市闻堰镇长安村祥大房329号